AFM02B OEM Ultra-Soft Flush-Fit Fan Mounts qty 100 (25 fans) NZ$106.37917 in stock
AFM02B Ultra-Soft Flush-Fit Fan Mounts, qty 8 (2 fans) NZ$8.311837 in stock
|More variations available|
Acousti Ultra-Soft Flush-Fit Silicone Fan Mounts AFM02B
Sometimes the cheapest solutions are the best, and these super-soft silicone fan mounts definitely fall into that category. They don’t cut down on air noise due to high fan speed, but for preventing low frequency fan rumble they are worth every penny.
See also: AFM03B Easy-Fit Fan Mounts
- Extra-soft black silicone gives optimal fan noise reduction
- Compatible with all fans with standard mounting holes
- Easy to fit and remove - no case modifications required
- Excellent value for money and long-lasting (durable and tearproof)
Why are Fan Mounts Necessary?
Vibration from fan motors can travel into a PC case and become amplified when a fan is fitted tightly. This unwanted ‘vibrational’ noise is an issue if you wish to build a very quiet or virtually silent PC. These mounts have been designed ‘from the drawing-board’ specifically to tackle fan-induced vibrational noise! Acousti Ultra-Soft Fan Mounts are a ‘no-vibration’ alternative to standard fan screws or hard plastic push pins.
To prevent the transmission of vibrations from a motor (such as a fan motor), the vibrating part needs to be decoupled (or disengaged) from the case, and the vibrations need to be damped, that is, attenuated. Acousti Products have selected an ultra-soft silicone polymer that effectively decouples the fan and also attenuates unwanted vibration. Both the shape and materials have been designed together to give a widely compatible fan mount.
These mounts are made from an ultra-soft silicone polymer because it is softer and more chemically stable than cheaper alternatives like rubber or EPDM. Ultra-soft silicone is non-toxic, more chemically stable, and can also tolerate higher temperatures - so it is a superior material for this application.
AFM02B - Acousti Ultra-Soft Fan Mounts are available in both Retail Packs of 8 mounts (shown), and packs of 100 mounts in bulk (enough for 25 fans) for OEM and system builders.
AFM02B Fan Mount Design. The fan mount has been designed with smoothed corners to prevent the propagation of cracks when stretched. When in position, the fan is held 1.25mm away from the case side - this is just enough to allow free movement of the fan and effectively absorb vibrations, but not too much to cause excessive air pressure loss around the fan.
Please note that this product is only compatible with flange type fans. This is because flange type fans (shown below) do not have a ‘tunnel’ connecting the mounting holes like Rib type fans. Flange type design is the most popular type of fan moulding used in PCs & servers. For rib-type fans, we recommend gaskets rather than fan mounts, which will give equally good performance.
1. Fit fan mounts to the case FIRST! Thread the fan mounts from the outside of the case through the case fan mounting holes, and pull the end of the mount (the arrowhead part) though until the mount ‘pops’ into position.
2. Thread the fan onto the fan mounts. Align the mounting holes on the fan corners with the fan mounts, and gently place the fan onto the mounts, so that they poke through each hole.
3. Pull fan mounts through fan holes. Using your forefinger and thumb, carefully pull the ‘arrowhead’ part of the fan mounts through the fan mounting holes. The trick here is to pull through and sideways at the same time, easing the arrowhead through. The arrowhead should pull though with a small ‘pop’.
“...most of the resonant buzz was eliminated. This indicates that the fan mounts were doing their job effectively.”
|Specifications||AFM02B x 100||AFM02B x 8|
|Fan Type||Designed to fit Flange Type fans||Designed to fit Flange Type fans|
|Range of Fan Mounting Holes||4.0 - 5.25mm diameter||4.0 - 5.25mm diameter|
|Range of Case Mounting Holes||4.0 - 5.5mm diameter||4.0 - 5.5mm diameter|
|Maximum recommended panel thickness||1.8 mm||1.8 mm|
|Weight each||0.4 g||0.4 g|
|Colour||Matt Black||Matt Black|
|Material||Ultra-Soft Silicone Dampening Polymer||Ultra-Soft Silicone Dampening Polymer|
|REACH environmental compliance||Yes||Yes|
|Normal Operating Temperature Range||-20°C to +70°C||-20°C to +70°C|
|Warranty||24 months||24 months|
|Specifications||AFM02B x 100||AFM02B x 8|
|Fan Type||Designed to fit Flange Type fans|
|Range of Fan Mounting Holes||4.0 - 5.25mm diameter|
|Range of Case Mounting Holes||4.0 - 5.5mm diameter|
|Maximum recommended panel thickness||1.8 mm|
|Weight each||0.4 g|
|Material||Ultra-Soft Silicone Dampening Polymer|
|REACH environmental compliance||Yes|
|Normal Operating Temperature Range||-20°C to +70°C|
We haven't received any reviews of this product yet.
Exactly what I’ve been looking for. Nice & sturdy yet flexible, easy installation.
First time buying from QuietPC.com as well: order received within 5 days (Belgium), properly packed to boot. Very pleased!
5/5 for both the product & service.
Really excellent fan mounts
These really do the job of reducing vibration from fan to case very well indeed.
I ordered them to use with a couple of Noctua fans. Although Noctua fans already come with their own silicon fan mounts which are good, I found that they were very difficult to actually install in tight corners of the case due to their slightly harder stiffness.
Because these Acoustic ones are incredibly soft, they’re far easier to stretch and thus much easier to install (and remove if needed)
These are a must have item.
Love these to bits, nothing technical, simple to use and really make a difference. Will be ordering more to put in my spares box.
Excellent cheap addition
Really easy to fit and did the job on my ReadyNAS Duo.
Top Fan Accessories
Acousti AFG120B Anti-vibration 120mm Fan Gasket
Acousti AFG80B Anti-vibration 80mm Fan Gasket
Acousti AFM02B OEM Ultra-Soft Flush-Fit Fan Mounts qty 100 (25 fans)
Quiet PC Professional Grade Air Duster, 400ml HFC Free Aerosol
Noctua NA-FC1 PWM Fan Controller
Acousti OEM-AFG120B 32 Black Anti-vibration 120mm Fan Gaskets
Gelid PWM Adaptor Cable for VGA Cooler Fans
Noctua NA-SYC1 4-Pin PWM Fan Y-Cables, 2 pack
Acousti AFM03B OEM Ultra-Soft Easy-Fit Fan Mounts qty 100 (25 fans)
Acousti AFG92B Anti-vibration 92mm Fan Gasket
“Best Service Ever”
“Best Service Ever”