MenuSearch | Country: New Zealand | Currency: NZD
Excellent
3,238 reviews at Trustpilot.3,238 reviews
NT-H1 Pro-Grade Thermal Paste, 1.4ml NZ$10.37
69 in stock
Add to Basket
(15 customer ratings / 1 review)
More variations available Show

Noctua NT-H1 Pro-Grade Thermal Paste, 1.4ml

Noctua’s NT-H1 is a pro-grade TIM solution for enthusiasts who demand both exceptional performance and maximum ease of use: A hybrid compound of different micro-particles allows for minimum thermal resistance, ease of use and outstanding reliability.

Features

  1. Excellent performance
  2. Maximum ease of use and efficient dosage
  3. Top-performance right from the start
  4. Excellent long-term stability
  5. Not electrically conductive, non-corroding

Excellent performance

NT-H1 consists of a hybrid compound of different micro-particles, which has been specifically optimised for use in PC environments. Thanks to its extremely low thermal resistance as well as excellent pliability and spreadability, NT-H1 achieves outstanding results.

Maximum ease of use & efficient dosage

As NT-H1 spreads very well under pressure, there’s no need to smear it over the heat-spreader. This reduces both the consumption of paste and the time spent on the installation process: Put one drop of NT-H1 onto the centre of your CPU, install the cooler and that’s it!

Top-performance right from the start

NT-H1 reaches its full performance extremely fast and doesn’t require a longer “burn-in” time.

Excellent long-term stability

NT-H1 doesn’t contain any solvents or other substances with low flash point and provides excellent long-term stability. Due to the compound’s exceptional curing, bleeding, dry-out und thermal cycling characteristics, NT-H1 can be used for several years without any problems.

Not electrically conductive, non-corroding

NT-H1 possesses a very low dielectric constant and a high dielectric strength. Therefore, there’s no danger of short-circuits even in case of direct contact with components or conducting paths. Fully compatible with all materials commonly employed in PC environments, NT-H1 is suited for use with aluminium and copper coolers.


Review

  • Mikhailtech.com

    “Noctua’s list of features for this paste couldn’t represent the product any better. It has excellent performance, is easy to install, has no burn-in time, and is not electrically conductive. Noctua NT-H1’s performance and features earn it the Editor’s Choice Award!”

SpecificationsNT-H1
Volume1.4ml (for at least 15 applications)
Specific Gravity2,49 g/cm³
Colourgrey
Recommended storage time (before use)up to 2 years
Recommended usage time (on the CPU)up to 3 years
Peak operating temperature-50°C to +110°C
Recommended operating temperature-40°C to +90°C
Warranty72 months
EAN barcode4716123312680
SpecificationsNT-H1
Volume1.4ml (for at least 15 applications)
Specific Gravity2,49 g/cm³
Colourgrey
Recommended storage time (before use)up to 2 years
Recommended usage time (on the CPU)up to 3 years
Peak operating temperature-50°C to +110°C
Recommended operating temperature-40°C to +90°C
Warranty72 months
EAN barcode4716123312680

Customer Reviews

Does the job, but the tube could be better designed

,

The paste does the job just fine. It’s a little tricky to work with in tight spaces though, as the tube has a short wide nozzle. Something longer and thinner would be neater.

Top CPU Cooling Accessories

Recently Viewed Products

“Excellent components”

“Excellent components, excellent customer service. I’m delighted with my purchase and highly recommend Quiet PC :)”

16th July 2019 via Trustpilot