MasterBox NR200P Mini-ITX White Discontinued | |
MasterBox NR200P Mini-ITX Black Discontinued | |
More variations available Show |
Cooler Master MasterBox NR200P Mini-ITX Cases
The MasterBox NR200P uses features normally found in stylish, high-end ATX cases and cleverly utilises space-saving measures to create a chassis taking up less than half the volume.
Features
- Limited Size, Unlimited Options
- Unrestricted Cooling Potential
- Triple-slot GPU support and Included Vertical Riser Cable
- Easy, Tool-free access
- Out-of-the-box Custom Cooling Support
Every feature in the NR200P is thoughtfully laid out in an 18-liter space to maximise component compatibility, thermal efficiency, and ease of assembly. Keep cool with a highly vented side panel, or look cooler with a crystal-clear tempered glass panel; both are included to satisfy performance and style preferences. Fit large graphics cards in the 3-slot capable NR200P, or utilise the two vertical cards slots with the included PCI riser to turn graphics cards and heads by making the GPU the centerpiece of the PC. Seven possible fan mounts, ample ventilation, and generous liquid and air-cooler clearances keep even the most powerful systems running at their optimum temperatures and speeds. The chassis frame is wrapped in a sleek and tasteful powder-coated steel chassis that makes a statement on a desk.
LIMITED SIZE, UNLIMITED OPTIONS
The NR200P includes many features found in larger ATX chassis while retaining a space-efficient form factor. The NR200P comes with the choice of a vented steel side panel for unrestricted airflow, or a crystal-clear tempered glass side panel to reveal the beauty of a computing beast. A PCI Riser is included for vertical GPU installation to better showcase it against the glass, or to feed it fresh air from the side with the vented panel.
UNRESTRICTED COOLING POTENTIAL
The NR200P can house up to 7 fans in total for every cooling configuration imaginable. Two 120mm Sickleflow fan are included. The compact structure can efficiently house CPU coolers up to 155mm in height and radiators up to 280mm in length, so even the hottest running hardware can’t be held back.
TRIPLE-SLOT GPU SUPPORT AND INCLUDED VERTICAL RISER CABLE
Triple slot GPUs are supported with a maximum length of 330mm and maximum width of 156mm allowing the fitment of large high-end graphics cards. A custom-sized riser cable is included to mount a graphics card vertically to showcase it, or allow radiator mounting at the bottom of the chassis to keep the system running as cool as it looks.
EASY, TOOL-FREE ACCESS
All external panels, including the tempered glass and top mounted fans are secured with pins for easy removal, facilitating quick access to the internals without the use of tools.
360 DEGREE ACCESSIBILITY
Every panel and frame part of the NR200P can be dismantled. Screws are used to secure the frame parts to allow advanced disassembly and multiple angles to easily work inside of the chassis.
HIGH QUALITY MATERIALS
Thick, powder coated SGCC steel keeps the fit and finish of the chassis clean and durable even with harsh travelling conditions
OUT-OF-THE-BOX CUSTOM COOLING SUPPORT
Two liquid cooling pump locations alongside side and bottom radiator mounting locations allow for powerful, custom water-cooled builds inside a compact enclosure.
MULTIPLE MOTHERBOARD SUPPORT OPTIONS
Compatible with Mini-ITX and Mini DTX. The PSU can be front-mounted for extra motherboard clearance with a maximum space of 244 x 226 mm.
CUSTOMISATION - 3D PRINTABLE FEET
During the design phase Cooler Master had created several variants for the case feet design. Following numerous iterations, the launch design was chosen, but they thought “why not share the iterations with their users?” The team unanimously agreed with this direction. As a result, end users can 3D print a selection of different shapes and sizes, and even choose the colour based on the filament they print with. Download files here.
SICKLEFLOW PWM FANS INCLUDED
Newly Optimised blade design with updated curve that provides best balance between airflow and static pressure to take the heat away while remain extremely quiet.
Specifications | NR200P Black | NR200P White |
---|---|---|
Series | MasterBox Series | MasterBox Series |
Case form factor | Mini-ITX | Mini-ITX |
Colour | Black | White |
Materials | Steel, Plastic, Mesh, Tempered Glass | Steel, Plastic, Mesh, Tempered Glass |
Dimensions (L x W x H) | 376 x 185 x 292mm incl. protrusions, 360 x 185 x 274mm excl. protrusions | 376 x 185 x 292mm incl. protrusions, 360 x 185 x 274mm excl. protrusions |
Volume | 18.25L (exlc. protrusions) | 18.25L (exlc. protrusions) |
Motherboard Support | Mini-ITX | Mini-ITX |
Expansion Slots | 3 | 3 |
5.25” Drive Bays | 0 | 0 |
3.5” Drive Bays | 1 (Max. 2) | 1 (Max. 2) |
2.5” / 3.5” Drive Bays (Combo) | 1 | 1 |
2.5” Drive Bays | 2 (Max. 3) | 2 (Max. 3) |
I/O Panel | 2x USB 3.2 Gen 1 Type-A, 1x 3.5mm Headset Jack (Audio+Mic) | 2x USB 3.2 Gen 1 Type-A, 1x 3.5mm Headset Jack (Audio+Mic) |
Pre-installed Fans - Top | 2x 120mm 650-1800RPM PWM (SickleFlow) | 2x 120mm 650-1800RPM PWM (SickleFlow) |
Fan Support - Top | 2x 120mm | 2x 120mm |
Fan Support - Rear | 1x 92mm | 1x 92mm |
Fan Support - Bottom | 2x 120mm (recommended slim fans for GPUs wider than 2.5 PCI slots) | 2x 120mm (recommended slim fans for GPUs wider than 2.5 PCI slots) |
Fan Support - Side | 2x 120/140mm | 2x 120/140mm |
Radiator Support - Rear | 92mm (Not Compatible with Vertical GPU Installation) | 92mm (Not Compatible with Vertical GPU Installation) |
Radiator Support - Bottom | 120mm, 240mm, (recommended for custom loops only) | 120mm, 240mm, (recommended for custom loops only) |
Radiator Support - Side | 120mm, 140mm, 240mm, 280mm, (not compatible with vertical GPU installation) | 120mm, 140mm, 240mm, 280mm, (not compatible with vertical GPU installation) |
Max CPU cooler height | 76mm (GPU in vertical position), 153mm (tempered glass side panel), 155mm (vented steel side panel) | 76mm (GPU in vertical position), 153mm (tempered glass side panel), 155mm (vented steel side panel) |
Max PSU length | 130mm | 130mm |
Max graphics card length | L: 330mm (incl. power connector), H: 156mm (incl. power connector), W: 60mm (triple slot) | L: 330mm (incl. power connector), H: 156mm (incl. power connector), W: 60mm (triple slot) |
Dust Filters | Top, Bottom, Left side, Right side | Top, Bottom, Left side, Right side |
Power Supply Support | SFX, SFX-L | SFX, SFX-L |
Weight | 5.93 kg | 5.93 kg |
Accessories | 1x PCIe 3.0 x16 riser cable | 1x PCIe 3.0 x16 riser cable |
Note | Single slot water-cooler GPUs or vertically mounted GPUs are recommended when using bottom radiator position, This product is only compatible for devices that support the PCI-E 3.0 specification. If you use this product with a motherboard that supports PCI-E 4.0, please enter into BIOS option and select PCI-E 3.0 before installation. | Single slot water-cooler GPUs or vertically mounted GPUs are recommended when using bottom radiator position, This product is only compatible for devices that support the PCI-E 3.0 specification. If you use this product with a motherboard that supports PCI-E 4.0, please enter into BIOS option and select PCI-E 3.0 before installation. |
Warranty | 24 months | 24 months |
EAN barcode | 4719512106761 | 4719512106778 |
Specifications | NR200P Black | NR200P White |
---|---|---|
Series | MasterBox Series | |
Case form factor | Mini-ITX | |
Colour | Black | White |
Materials | Steel, Plastic, Mesh, Tempered Glass | |
Dimensions (L x W x H) | 376 x 185 x 292mm incl. protrusions, 360 x 185 x 274mm excl. protrusions | |
Volume | 18.25L (exlc. protrusions) | |
Motherboard Support | Mini-ITX | |
Expansion Slots | 3 | |
5.25” Drive Bays | 0 | |
3.5” Drive Bays | 1 (Max. 2) | |
2.5” / 3.5” Drive Bays (Combo) | 1 | |
2.5” Drive Bays | 2 (Max. 3) | |
I/O Panel | 2x USB 3.2 Gen 1 Type-A, 1x 3.5mm Headset Jack (Audio+Mic) | |
Pre-installed Fans - Top | 2x 120mm 650-1800RPM PWM (SickleFlow) | |
Fan Support - Top | 2x 120mm | |
Fan Support - Rear | 1x 92mm | |
Fan Support - Bottom | 2x 120mm (recommended slim fans for GPUs wider than 2.5 PCI slots) | |
Fan Support - Side | 2x 120/140mm | |
Radiator Support - Rear | 92mm (Not Compatible with Vertical GPU Installation) | |
Radiator Support - Bottom | 120mm, 240mm, (recommended for custom loops only) | |
Radiator Support - Side | 120mm, 140mm, 240mm, 280mm, (not compatible with vertical GPU installation) | |
Max CPU cooler height | 76mm (GPU in vertical position), 153mm (tempered glass side panel), 155mm (vented steel side panel) | |
Max PSU length | 130mm | |
Max graphics card length | L: 330mm (incl. power connector), H: 156mm (incl. power connector), W: 60mm (triple slot) | |
Dust Filters | Top, Bottom, Left side, Right side | |
Power Supply Support | SFX, SFX-L | |
Weight | 5.93 kg | |
Accessories | 1x PCIe 3.0 x16 riser cable | |
Note | Single slot water-cooler GPUs or vertically mounted GPUs are recommended when using bottom radiator position, This product is only compatible for devices that support the PCI-E 3.0 specification. If you use this product with a motherboard that supports PCI-E 4.0, please enter into BIOS option and select PCI-E 3.0 before installation. | |
Warranty | 24 months | |
EAN barcode | 4719512106761 | 4719512106778 |
Product Resources
Top Quiet PC Cases
Antec P5-SILENT, Quiet Mid-Tower Micro-ATX PC Chassis
Fractal Design Define 7 Mid Tower Black PC Case
Akasa Galileo TU3 Plus MKII 1U Rackmount Fanless Thin Mini-ITX Case
Fractal Design Define 7 Compact Black Mid Tower PC Case
Streacom ST-BC1 V2 Black Aluminium ATX Open Benchtable
Cooler Master Masterbox Q300L V2 Micro-ATX PC Chassis
Fractal Design Meshify 2 Compact Black PC Case
Streacom DA2 V2 Black Full Aluminium Compact ITX Chassis
Streacom ST-BC1 Mini Black Aluminium ITX Open Benchtable
MyElectronics 19in 2U Rackmount Short Depth Mini-ITX Chassis